Two motors starters

This project is about starting two motors by two different methods. One method is that the first motor starts and then the second will start after it. Second motor can not start without starting of the first one. This method can be used by a manual start for second motor or it can be done by a timer automatically. The other method is like the first one but second motor will make the first one off after starting. There is a simulation in EKTS free application.

Download link:

https://drive.google.com/open?id=1OkYkCv3bhKuw-zJ1udGW_LXsKyANeErS

Comments

Motor On/Off with instant and latch switch circuit diagram simulation

This project is about how to turn On or turn Off a motor by switches. In the first one we want the motor to be as long as our finger is on the switch. In the second one we press the button once, and the motor remains on until we press the stop button. Finally, we have a circuit that includes both of switches. There is a simulation in EKTS free application. Download link: https://drive.google.com/open?id=1TlnbmcjqjQuaftCit8UIRN--3mQ4AcQm

Pump starter by Delta PLC

In this project there is a pump that runs by start and stop buttons. The logic control is if there is water in tanker level sensor detects it that gives the permission to start the motor. There are two ways for stopping the motor. First by pressing stop button manually and second giving stop command by level sensor. We can start the pump only when there is enough water in the tanker. Program was written in WPLSoft and HMI program Was written in DOPSoft. Download link: https://drive.google.com/open?id=1wDUgAoTJ9eAnXddr6IJMztj-0wPK2pn2

PLC Programming Projects

Search This Blog